I was wondering if it was possible to get you to measure the section height of your 265/35/22 tires. My tire calc says it should be about 3.6".........so if you could measure the length between where the rim ends, and where the tire ends I would really appreciate it. THANKS

I don't have 22's but if the sidewall height is what you are looking for I believe you are correct.

Total tire height can not exceed 29.5" so with
22 inch rim that leaves a max or 7.5" divided by 2 = 3.75"
So anything in that area should be fine.

The 29.5 figure is based on the fact that this is the size of the biggest tire that Dodge uses on the R/T. This tire has approx .35" clearance at the rear of the tire at max turn. A slightly larger tire can be added but there is some serious mods to be done.

I hope this helps.

__________________

2007 Nitro R/T, Chrome Bug Deflector , In Channel Vent Guards, Stainless Bull Bar and Nerf Bars.