Not sure yet if this is going to be the case on the Nitro versions of MyGIG, but the latest application software update (v9.561) eliminates having to constantly press the "Accept" button everytime you start the vehicle or turn on the nav. The screen now automatically disappears after a few seconds (yes!!!). This has so far been verified on the 2008 Grand Cherokee and 2007-2008 Wrangler.

The main reason for the update was to address the iPhone issues, which it fixed along with a few other bugs.

Here is a link for the download:

jeep.i-thrash.net/bin/mygig/NTG4_9.561.zip

Unzip the files to your Hard drive and burn them to a CD data disc:

1. Data Disc name needs to be NTG4_9.561

2. Root directory MUST contain only one folder and two files:

BECKER (folder)
CD_INFO.CDI
CONFIG.CDI

Load the CD in your MyGIG radio and the update will automatically start once the disc is reconized. Updating will take around 10 minutes or so and a progress screen is displayed.

--RS--

Neat, that would be nice not to have to push the button all the time, if it works on the Nitro.

I did this update. On the Nitro, it does not eliminate the "Accept" button. Well, it does eliminate it if you are really really fast in and out of your Nitro, that is under 60 seconds. Over an minute with the key removed the nag screen is back.

Depending on your download speed, it could take some time. I have not seen every screen, but everything that I have looked at works. I don't know if this changed anything with the way you can setup play lists or not. I have not seen any errors caused by this updated software.

Tim

Bummer, I figured it would still be there, but it would at least fade away by itself, without having to push the button.
Oh, well.

Hmm, maybe you have a very early production radio as 2007-2008 Wranglers are reporting success with the screen auto-disappearing, and Wrangler's use same radios as Nitro's.

The screen now goes away without having to push accept after about 4 seconds..

These are posts I have had on the Nitro pages and I am looking for help any where I can find it.

#1 Oh Boy I need help. I downloaded the update 9.56-- and burned the cdr. MyGig recognized the disk and asked if I wanted to update (which I did) and now I get serious error 2020 & serious error 2202. I cannot get the disk to eject or the screen to even open. I have tried pulling the fuse to no avail. The MyGig will re-boot in update mode but will not go past the serious errors. How do I get the disk out? I am burning a new disk and need to get the old one out. I am quite computer savvy and am sure the disk was done properly. Please help! My MyGig is currently a high priced night light

#2 Display will not open. I have tried to do the manual disk removal method but nothing happens. It just resets and tries to install update again and again each time stopping at error 2020 followed by a re-boot and error 2202 and re-boots again. I am at a loss.

#3 I have pulled the fuse and it restarts itself when I put the fuse back in, but with the same errors each time. I have done this more times than I can count and no success. I neglected to finalize the cd that is currently in the disk drive. I think if there is some way to get the disk out and put in a new cd that is finalized it may make a difference. The update process locks out the buttons, though. I have tried the manual cd removal but the front screen will not open. Where would I go to find a technical manual on MyGig? The owners manual is no help whatsoever.

#4 I have gently tried to push & pull the screen slide but it seems to be locked up tight. I am going to see what the dealer tells me tomorrow and then I will be back here tomorrow. I found someone else who had the same problem on Apple computer's forum about a week ago, but they have not posted any fix for the problem. I definitely will post my findings