Quote:
Originally Posted by Frederick
These are the versions I want 
Rick, just out of interest there appears to be a gap on the trim panel above the front bumper. Its the one piece trim that sits below the headlights. Did you install this back properly? |
Good Eye! Yes I did not notice it after-the-fact (picture taking) and when I did I removed the top push plugs holding the grille and found I had pinched the side marker wiring harness on the right side and that kept the bottom from a flush mount as well as the right side too. Guess I was in a hurry, but really this is a two hour install or less, and this fix was five minutes or less. Didn't think anyone would notice except me! Wrong again!
Thanks for your post!
Frederick check out my other Thread on this lights if you have not already:
http://www.dodge-nitro.com/forums/f1...eadlamps-4573/
__________________
Rick
Nitro Year: 2007 (1 of 113,000 sold)
Nitro Model: R/T 4X4 Stone White
CAT-BACK Exhaust, CAI, Projector Head Lamps
Fully-Equipped w/all factory options
|
