|
Fog Lamps
NOTE: To remove Fog Lamps (not required as part of grille removal) you will find that the two "screws" are TORX (T-15) and will require a special TORX bit type wrench or stubby TORX screwdriver to remove. I used a T-15 Hex Bit with a right angle ratchet wrench. To remove the left side Fog Lamp I found cranking the wheel as far left allowed access after removing the lower wheelwell inter-liner pin (pry out the center pin first). For the right side, crank the front wheel as far right as possible. I plan not to use these same screws when I re-install these lamps
__________________
Rick
Nitro Year: 2007 (1 of 113,000 sold)
Nitro Model: R/T 4X4 Stone White
CAT-BACK Exhaust, CAI, Projector Head Lamps
Fully-Equipped w/all factory options
|
