Dodge Nitro Projector Headlamps

**rickaren** · #1 (**permalink**) 12-25-2009, 02:39 PM

NOTE:
TWO Threads on Nitro Projector Headlamps!

ONE about these types of lights, how they look installed; four options available; warranty and price. Dodge Nitro Projector Headlamps (This Thread)

TWO is if are considering purchasing them or have, how to install them. Installing Dodge Nitro Projector Headlamps

Installed Lights: Not On

Installed Lights: Halo Lights Only On

Installed Lights: Low Beam/Parking Lamp On

**rickaren** · #2 (**permalink**) 12-25-2009, 02:49 PM

Installed Lights: Hi Beams On

Installed Lights: Hi Beams On

When searching for complete projector headlamps for the Nitro I found these units that are really plug & play. The only hookup wiring needed is one black (ground) and one red (power) for the CCFL “Halo rings.

Hard to believe but CARiD offers not one but FOUR Projector Headlamps for the Nitro!

Crystal Clear Projector Headlights - Style A
THL-10470 (regular turn lamp bulb)

Black Projector Headlights - Style A
THL-10471 (regular turn lamp bulb)

**rickaren** · #3 (**permalink**) 12-25-2009, 03:06 PM

Crystal Clear Projector Headlights - Style B
THL-10472 (LED type turn lamp assembly)

Black Projector Headlights - Style B
THL-10473 (LED type turn lamp assembly)

NOTE:

I called CARiD before ordering with several questions. I was informed that these units have a full two year replacement warranty and that both headlamp bulbs are replaceable. However, when I received my ordered units there was no warranty copy or install instructions. I contacted Steven Royzenshteyn and he confirmed their Policy of a two year warranty with an e-mail. When shopping for these types of headlamps keep in mind that some companies offer little or no warranty or will supply it, at an additional charge. For some reason (hopefully this will be corrected) there is no mention of this warranty coverage by CARiD (not by the manufacture) on their Web pages of these lamps. Also make sure you use Discount Coupons shown in our Supporting Vendors Section in comparing prices or ordering, as I did.

This is my second order from them and yes the Discount Coupon applies to your other non-Nitro vehicles, too! I ordered a pre-painted rear factory type rear spoiler for my Wife’s new 2010 Ford Taurus Limited. It was made in the USA (these lamps are not) and came with instructions and a color match guarantee and a 3 years warranty on the spoiler. To me warranty and customer service is a big concern and I have no problems recommending them. I posted install pictures of the spoiler over @ taurusclub.com Installed Rear Spoiler On 2010 Limited - Taurus Car Club of America and fordtaurus.net/ FordTaurus.net • Added Rear Spoiler - Ford Taurus Forum if you are interested.

As I have done in the past on other Nitro modifications, I will post a detailed picture install on how to remove your Nitro grille, and install these types of lamps to assist our members here, if you are considering updating your Nitro. I did receive e-mail instructions from CARiD per my request but it is of little use.

You Tube

I am going to generate and forward an Instructions Thread to CARiD so they might use it as a reference in the future for other Nitro Owners.

Installing Dodge Nitro Projection Headlamps

Thread Link: http://www.dodge-nitro.com/forums/f1...eadlamps-4573/

**rickaren** · #4 (**permalink**) 12-25-2009, 07:21 PM

BEFORE (from this Thread) HID Head lights?

[COLOR="Red"][B]AFTER

"Low" (projector outside bulbs)

"High" (inside lamps only)

As you can see there is a huge difference from what I had before especially going to high beams. This may be since I have two bulbs instead of the just one on each side, but they are not on together. Yes low beams (projector outside) goes off when you switch on "Hi" beams (inside). It appears that the right lamp may need to be adjusted but with it cold and snowy here today that can wait! At least you get the ideal!

I drove the car yesterday for about 70 miles on the Interstate and Local roads and did not have anyone object by flashing their lights, so it is a wait & see if these brighter and safer and way cooler looking lamps will become an issue.

claudyoz · #5 (**permalink**) 12-26-2009, 05:45 AM

great subject rickaren...they are really kewl!

too bad here we can't install them due to the different certifications

Frederick · #6 (**permalink**) 01-18-2010, 06:13 PM

Quote:

Originally Posted by claudyoz

great subject rickaren...they are really kewl!

too bad here we can't install them due to the different certifications

Lovely I so need a pair of these myself. But really wanting Bilsteins first

Stalling as I need a trusted person to help me fit them.

Frederick · #7 (**permalink**) 01-18-2010, 06:19 PM

These are the versions I want

Rick, just out of interest there appears to be a gap on the trim panel above the front bumper. Its the one piece trim that sits below the headlights. Did you install this back properly?

**rickaren** · #8 (**permalink**) 01-18-2010, 09:50 PM

Quote:

Originally Posted by Frederick

These are the versions I want

Rick, just out of interest there appears to be a gap on the trim panel above the front bumper. Its the one piece trim that sits below the headlights. Did you install this back properly?

Good Eye! Yes I did not notice it after-the-fact (picture taking) and when I did I removed the top push plugs holding the grille and found I had pinched the side marker wiring harness on the right side and that kept the bottom from a flush mount as well as the right side too. Guess I was in a hurry, but really this is a two hour install or less, and this fix was five minutes or less. Didn't think anyone would notice except me! Wrong again!

Thanks for your post!

Frederick check out my other Thread on this lights if you have not already:
http://www.dodge-nitro.com/forums/f1...eadlamps-4573/

Frederick · #9 (**permalink**) 01-20-2010, 07:58 PM

[quote=rickaren;10071]Good Eye! Yes I did not notice it after-the-fact (picture taking) and when I did I removed the top push plugs holding the grille and found I had pinched the side marker wiring harness on the right side and that kept the bottom from a flush mount as well as the right side too. Guess I was in a hurry, but really this is a two hour install or less, and this fix was five minutes or less. Didn't think anyone would notice except me! Wrong again!

Thanks for your post!

Frederick check out my other Thread on this lights if you have not already:
http://www.dodge-nitro.com/forums/f1...eadlamps-4573/
Thanks for the write up and the advise about masking the prone areas with painter tape a very good idea.
I really need a pair of those headlights

That link comes back here?

**rickaren** · #10 (**permalink**) 01-20-2010, 09:58 PM

Quote:

Originally Posted by Frederick

Thanks for the write up and the advise about masking the prone areas with painter tape a very good idea.
I really need a pair of those headlights

That link comes back here?

Sorry for the confusion Frederick, but I created TWO Threads on Nitro Projector Headlamps on purpose.

ONE about these types of lights, how they look installed; four options available; warranty and price.

TWO is if are considering purchasing them or have, how to install them.

I will edit both Threads to make this more clear. Thanks again for your comments.

Fredrick weather here in Indiana has not been the norm this year. I was in a hurry to take pictures the same night as my hurry-up install with snow in the forecast. I really didn't notice the grille was not properly installed until I noticed the right upper side had a gap and by correcting that it corrected headlamp alignment also. Usually Winter doesn't start so cold here, but I ended up installing a special ordered patio storm door(s) when the high temp was 14 degrees!