iPhone 2G & 3G with Uconnect

Retrospects · #1 (**permalink**) 09-25-2008, 07:47 AM

this has prob been asked before on here but dose anyone know if the Uconnect will support Iphone 2G and 3G? what do i need to do to get it to work?

thanks

**rickaren** · #2 (**permalink**) 09-25-2008, 09:06 AM

Quote:

Originally Posted by Retrospects

this has prob been asked before on here but dose anyone know if the Uconnect will support Iphone 2G and 3G? what do i need to do to get it to work?

thanks

I really don't have an answer but I just had the H-11 Recall performed on my R/T (Dodge sent me the new update CD) that had the 9.713 software. This was sent free of charge to my home for self install, but since the NITRO was going in for service I had them install it free of charge. Do you have the latest software? What year is your NITRO?

A newer update is out there too. I read somewhere about the 2009 MYGIG had a different serial port on the back than 2007/08 NITROs. Anyway the first place to start is with the latest software if you want the latest support. I have read that "On-Line" support lists from Chrysler are out dated but are avaiable by phone.

Anyone out there know the answer for Retrospects?

http://www.wkjeeps.com/misc/KA/TSB/T...ro_0802408.pdf

Retrospects · #3 (**permalink**) 09-25-2008, 10:16 AM

i just have the stock deck.

its from 2007

**UN4GTBL** · #4 (**permalink**) 09-25-2008, 04:36 PM

its a good thing that i read threads before i ban people, i saw iphone 2g and 3g and just about banned you ha ha,

I have no experience with uconnect or the iphone so i cant really help you

**rickaren** · #5 (**permalink**) 09-27-2008, 06:51 AM

Quote:

Originally Posted by Retrospects

this has prob been asked before on here but dose anyone know if the Uconnect will support Iphone 2G and 3G? what do i need to do to get it to work?

thanks

I read that latest software update for the iPhone (2.1) will make U-Connect in the NITRO work just fine. So if you have the latest software installed in your NITRO, then you need to make sure your phone has the latest too! Hope this help and Good Luck!

**UN4GTBL** · #6 (**permalink**) 09-27-2008, 02:37 PM

Quote:

Originally Posted by rickaren

I read that latest software update for the iPhone (2.1) will make U-Connect in the NITRO work just fine. So if you have the latest software installed in your NITRO, then you need to make sure your phone has the latest too! Hope this help and Good Luck!

that update seems to be the aid in other chrysler vehicles too

Retrospects · #7 (**permalink**) 09-29-2008, 07:40 AM

ok so here is my next question....
how much dose Uconnect cost to accitvate...

the only reason i did not do it when i got the truck was becuase it did not work with the iPhone.

oh and congrats on all the SPAM BANS!!

**rickaren** · #8 (**permalink**) 09-29-2008, 09:23 AM

Quote:

Originally Posted by Retrospects

ok so here is my next question....
how much dose Uconnect cost to accitvate...

the only reason i did not do it when i got the truck was becuase it did not work with the iPhone.

oh and congrats on all the SPAM BANS!!

You may find some answers here (but they may be somewhat dated) about how Uconnett works but there are no fees since the software is built-in your phone and radio.

u c-o-n-n-e-c-t

**UN4GTBL** · #9 (**permalink**) 10-01-2008, 02:39 PM

Quote:

Originally Posted by Retrospects

ok so here is my next question....
how much dose Uconnect cost to accitvate...

the only reason i did not do it when i got the truck was becuase it did not work with the iPhone.

oh and congrats on all the SPAM BANS!!

if you ordered your truck with uconnect it will not cost you anything to enable the uconnect

Thanks!