Nitro Exhaust - Dodge Nitro Forum
Dodge Nitro Dodge Nitro
 

» Auto Insurance

» Featured Product
» Wheel & Tire Center

Go Back   Dodge Nitro Forum > Dodge Nitro Discussion > General Discussion

General Discussion This section contains general discussion relating to the Dodge Nitro - if it doesnt fit in a more specific section, use this.

Dodge-Nitro.com is the premier Dodge Nitro Forum on the internet. Registered Users do not see the above ads.
Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11-18-2006, 07:35 PM
Junior Member
 
Join Date: Nov 2006
Posts: 29
Nitro Exhaust

Just replaced the stock muffler with a Flowmaster 40 series muffler. I am using 2.5" mandrel bends for the exhaust and have only at this time replaced the large muffler section. I plan on soon completing the rest of the exhaust including the resonator right at the end of the exhaust system. It has a great sound on startup and a little rumble on idle. It isn't very intrusive upon normal driving, but I think it will be a lot more agressive sounding with the resonators removed. For a bit deeper tone I will maybe change the muffler out for the Flowmaster 50 series SUV. I will try to get a soundclip of the exhaust on startup here shortly if I can figure out how to get it posted.
Reply With Quote
Sponsored Links
Advertisement
 
  #2 (permalink)  
Old 11-19-2006, 10:05 PM
danpfay99's Avatar
Senior Member
 
Join Date: May 2006
Location: Kake, Ak.
Posts: 112
Re: Nitro Exhaust

How many bendsdid it take to make the flow fit. I plan on adding an aero turbine at2525 to mine just like to get an idea.
Reply With Quote
  #3 (permalink)  
Old 11-28-2006, 08:40 AM
Junior Member
 
Join Date: Nov 2006
Posts: 29
Re: Nitro Exhaust

Well the flowmaster muffler is about 18" long and it replace the stock 3' muffler. It required to run piping in both directions to meet up with the stock piping but it was relatively straight for the most part. I just finished off adding the 2.5" mandrel bend piping out the back and getting rid of the rear resonator. It gave it a much more agressive noticeable sound. I am going to go outside here in a bit and take a picture of the exhaust from underneath to give you an idea. Next step is to run the piping up towards the headers and replace it with new piping and high flow magnaflow catalytic converters.
Reply With Quote
  #4 (permalink)  
Old 11-28-2006, 10:41 AM
danpfay99's Avatar
Senior Member
 
Join Date: May 2006
Location: Kake, Ak.
Posts: 112
Re: Nitro Exhaust

Thanks that would help a lot, have to order all the parts & have shipped in. so every little bit helps.
Reply With Quote
  #5 (permalink)  
Old 11-28-2006, 11:58 AM
Junior Member
 
Join Date: Nov 2006
Posts: 6
Re: Nitro Exhaust

Since I'm not a mechanic[ or attorney] ,I'm wondering if changing the exhaust system will or does negate or void the warranty ! Does anyone know the answer ?
Reply With Quote
  #6 (permalink)  
Old 11-28-2006, 12:39 PM
Junior Member
 
Join Date: Nov 2006
Posts: 29
Re: Nitro Exhaust

Good question. I doubt it but since there is the strong possibility there is a reason i am keeping the stock exhaust. Always can go and bolt that sucker right back up in there. Where I live not so much of a big deal, no emissions and no one cares at the dealership anyway. If it does negate the warranty then hell, time to order up the JET Performance chip and rip out the cat's...

Wasn't able to get outside and take pictures. Realized that my mom in her infinite wisdom took my camera on vacation to Ecuador for two weeks. I will try to borrow a camera and get the pictures.
Reply With Quote
  #7 (permalink)  
Old 11-28-2006, 03:11 PM
danpfay99's Avatar
Senior Member
 
Join Date: May 2006
Location: Kake, Ak.
Posts: 112
Re: Nitro Exhaust

If you change thr exhaust there is no more warranty on the exhaust, they cannot void the rest of the warranty unless they can prove the exhaust change was the direct cause of whatever problem arises. warren/ magnason act passed by congress like 20 years ago & still in force.
Reply With Quote
  #8 (permalink)  
Old 11-29-2006, 07:17 PM
Junior Member
 
Join Date: Nov 2006
Posts: 7
Re: Nitro Exhaust

Quote:
Originally Posted by CentralOregonNitro
Just replaced the stock muffler with a Flowmaster 40 series muffler. I am using 2.5" mandrel bends for the exhaust and have only at this time replaced the large muffler section. I plan on soon completing the rest of the exhaust including the resonator right at the end of the exhaust system. It has a great sound on startup and a little rumble on idle. It isn't very intrusive upon normal driving, but I think it will be a lot more agressive sounding with the resonators removed. For a bit deeper tone I will maybe change the muffler out for the Flowmaster 50 series SUV. I will try to get a soundclip of the exhaust on startup here shortly if I can figure out how
to get it posted.

I love how the 40 series sounded on my 2002 S-10 was thinking of doing the same if and when i buy a nitro
Reply With Quote
  #9 (permalink)  
Old 12-01-2006, 07:46 AM
Junior Member
 
Join Date: Nov 2006
Posts: 29
Re: Nitro Exhaust

It sounds great at the lower rpm's up until say about 2500. I just doesn't have the rumble that I was hoping for though. Not dissapointed though by any means. Tempted to run in straight pipe for a bit.
Reply With Quote
Sponsored Links
Advertisement
 
Reply

  Dodge Nitro Forum > Dodge Nitro Discussion > General Discussion


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hemi-Powered Dodge Nitro Charges at SEMA HEMEEE Dodge Nitro News 0 09-22-2006 07:01 PM
Win a Lease on a Dodge Nitro moprmusl71 General Discussion 1 09-11-2006 10:02 AM
Nitro pricing ResumeSpeed General Discussion 3 08-16-2006 02:24 PM
Dodge Readies Nitro for SEMA... HEMEEE Dodge Nitro News 0 06-23-2006 02:44 PM
Inside Line: 2007 Dodge Nitro HEMEEE Dodge Nitro News 0 06-03-2006 09:46 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -6. The time now is 07:31 PM.



Powered by vBulletin® Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.3.2
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.