Dodge Nitro: Installing V5 Lockpick - Dodge Nitro Forum
Audio/ Video/ Navigation / Electronics Discussion Discuss the Nitro A/V and navigation system here, along with other items such as custom installations, alarms, radar detectors, etc.

 
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 07-29-2014, 05:15 PM Thread Starter
Super Moderator
 
rickaren's Avatar
 
Join Date: Nov 2006
Location: Indiana
Posts: 22,861
Garage
Dodge Nitro: Installing V5 Lockpick

Dodge Nitro: Installing V5 Lockpick

07/29/2014




This product is extremely impressive for many features as shown below. For me my main object was to install front and rear cameras to be viewed on my Nitro 730N radio (RER)equipped with factory MyGIG screen, multimedia navigation GPS radio with SRIUS and rear seat video system and wireless headphones. As you can see below this kit works with all 2007-2011 Nitro MYGIG APPLICATIONS INCLUDE ALL RER / REN / RHB / RBZ / RHR.









HUGE LIST OF STANDARD FEATURES ON THE NEW MYGIG LOCKPICK V.5


USB UPDATE ABILITY - STAY CURRENT WITH FUTURE MYGIG AND LOCKPICK UPDATES
NEW PERFORMANCE TIMERS ALLOW YOU TO TRACK YOUR VEHICLE ACCELERATION FROM 0 TO 60 MPH MEASURED IN 100THS OF A SECOND OR MPH REACHED IN 10 SECONDS!!
DVD PLAY WHILE IN MOTION - AUTOMATIC OR ON DEMAND
SAT TV ON FRONT SCREEN WHILE IN MOTION (IN EQUIPPED VEHICLES) - AUTOMATIC OR ON DEMAND
NAVIGATION ADDRESS INPUT WHILE IN MOTION (IN EQUIPPED VEHICLES) - AUTOMATIC OR ON DEMAND
UNLOCK EVEN DEALER BLOCKED VIDEO - EVEN IF YOUR VIDEO BUTTON IS NEVER VISIBLE THE LOCKPICK WILL EXPOSE AND UNBLOCK IT
TURN ON BACKUP REVERSE CAMERA INPUT FOR AFTERMARKET INSTALLATIONS
TURN ON FACTORY REVERSE CAMERA AT ANY TIME, EVEN IN DRIVE IF DESIRED
TURN ON A REAR SEAT BABY CAM AT ANY TIME
TURN ON A FRONT CAMERA AT ANY TIME
TURN ON A FRONT CAMERA AUTOMATICALLY BELOW 8MPH TO AID IN PARKING
OPTION BUILT IN FOR TURN SIGNAL CAMS - ACTIVATE AUTOMATICALLY WHEN TURN SIGNAL APPLIED, OR TURN ON LEFT OR RIGHT SIDE CAM MANUALLY AT ANY TIME
TURN ON VES (REAR ENTERTAINMENT MODE) IN NON EQUIPPED VEHICLES - ENABLES A VIDEO AND AUDIO INPUT FOR YOUR IPOD, IPHONE, COMPUTER, OR VIDEO GAME
AUX INS UNLOCKED IN VES EQUIPPED VEHICLES WHILE IN DRIVE
UCONNECT AND VOICE RECOGNITION ENABLED ON CAPABLE NAV RADIOS - JUST ADD A FACTORY MICROPHONE AND YOU ARE READY TO GO
NO SWITCHES TO ADD - USES FACTORY TOUCH SCREEN AND RADIO BUTTONS AND STEERING WHEEL CONTROLS
NO LOSS OF NAVIGATION USE WHILE UNLOCKED - VOICE COMMANDS AND MAP TRACKING UNAFFECTED - EVEN WHILE VIDEO IS VIEWED
ACC POWER OUTPUT PROVIDED FOR YOUR AFTERMARKET POWER NEEDS - TURNS OFF WHEN YOUR CAR TURNS OFF
CAMERAS POWERED AND CONTROLLED BY THE LOCKPICK - NO NEED FOR COMPLICATED WIRING OR EXTRA SWITCHES
PROGRAMMABLE DIP SWITCHES TO ENABLE OR TURN OFF SPECIFIC FUNCTIONS
NO CUT WIRES - 15 MINUTE INSTALL WITH PLUG AND PLAY FACTORY CONNECTORS
GREAT FOR LEASED CARS!! - UNPLUG IT AND YOUR CAR IS BACK TO STOCK
WORKS WITH ALL MYGIG RADIOS IN ANY CHRYSLER DODGE JEEP INCLUDING MANUAL AND AUTOMATIC TRANSMISSIONS - ADVANCED UNIVERSAL COMMUNICATIONS




To install this MYGIG V5 Freedom In Motion in a Nitro you first need to remove the radio trim plate and radio as shown in this video

https://www.dodge-nitro.com/forums/f1...html#post34585




DON’T Do as I did and follow instructions. First off cover your Screen to protect it from any scratches.












It may be best to remove the radio, install the new Lockpick harness then reinstall to Nitro to hook backup to factory harness. To allow more room you can also place the vehicle in drive, turn off engine and apply the emergency brake.



The new harness easily fits through an opening to the right passenger side to behind the glove box door. Drop down the door by squeezing both plastic hinges to the inside to access the new Lockpick harness for intended use. Keep in mind that with the glove box door disconnected and hanging down you cannot shut the passenger door, however with it dropped down you can slide it to the right and completely remove it.




Other Links that you might want to visit too:

How to install front and rear Nitro license plates


How to install a rear back-up camera on a Nitro


How to install a front view camera on a Nitro

I purchase this Lockpick unit and did experience an issue from the start that proved to be a defective Lockpick brain (CPU) that is enclosed in a flimsy plastic housing and must have had a cracked or broken printed circuit board. Nothing I did and was not damaged in shipping but if I just touched the unit, that plugs in to their harness, both cameras would work or not work! Thanks to GPS & Radar Shop (Amazon) for exchanging this unit with a new one that corrected immediately this issue that originally drove me crazy.
Attached Images
File Type: jpg 100_1659.jpg (94.0 KB, 5 views)
File Type: jpg 100_1658.jpg (91.6 KB, 5 views)
File Type: jpg 100_1642.jpg (96.9 KB, 6 views)
File Type: jpg 100_1657.jpg (91.7 KB, 5 views)

Rick

Nitro Year: 2007 (1 of 91,815 sold in 07)
Nitro Model: R/T 4X4 Stone White
CAT-BACK Exhaust, CAI, Projector Head Lamps
Fully-Equipped w/all factory options
rickaren is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 08-30-2014, 09:53 AM Thread Starter
Super Moderator
 
rickaren's Avatar
 
Join Date: Nov 2006
Location: Indiana
Posts: 22,861
Garage
Update

Update

08/30/2014

I experienced another issue with what I feel is a very poorly designed case for the brains of this unit.

First off there is no mounting bracket or mounting hole on this plastic case. Sure it is very light in weight and so it could just hang from the wiring harness. Maybe that is what other Nitro owners have done? But for me and my experience with the first CPU case not protecting the printing circuit board I suppose, I wanted to place this case somewhere in the Nitro not just hanging to protect it and also not to rattle. I found a cubbyhole just behind the glove box that would work just fine.

Well just a few days after installation both cameras started acting up. Upon investigating I was shocked to see that not only one but both of the control box switch settings had changed! Yes the switches protrude from the case and must have moved while driving! I reset all switches to their proper and original settings and fabricated covers to protect these switches and settings held on with electrical tape around the case and returned to that cubbyhole.. It has now been over a month with no recurring issues or problems.

Rick

Nitro Year: 2007 (1 of 91,815 sold in 07)
Nitro Model: R/T 4X4 Stone White
CAT-BACK Exhaust, CAI, Projector Head Lamps
Fully-Equipped w/all factory options
rickaren is offline  
post #3 of 3 (permalink) Old 07-12-2015, 06:53 PM Thread Starter
Super Moderator
 
rickaren's Avatar
 
Join Date: Nov 2006
Location: Indiana
Posts: 22,861
Garage
Mygig Lockpick installation in a 2007 Dodge Nitro

The installation of the MYGIG LOCKPICK in a Dodge Nitro is detailed in the following video. After plugging in the Lockpick, all functions can be unlocked for video in motion, navigation input while in motion, along with camera input and control with multimedia audio and video inputs. If you do not have a MYGIG radio in your vehicle and wish to add one, the video below demonstrates how to take apart the dash and upgrade.


Mygig Lockpick installation in a 2007 Dodge Nitro

Uploaded on Oct 2, 2011

Installation of the Mygig Lockpick in a 2007 Dodge nitro

Rick

Nitro Year: 2007 (1 of 91,815 sold in 07)
Nitro Model: R/T 4X4 Stone White
CAT-BACK Exhaust, CAI, Projector Head Lamps
Fully-Equipped w/all factory options
rickaren is offline  
Sponsored Links
Advertisement
 
Reply

  Dodge Nitro Forum > Dodge Nitro Discussion > Audio/ Video/ Navigation / Electronics Discussion

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Dodge Nitro Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Installing Dodge Nitro Projector Headlamps rickaren Interior/Exterior Appearance & Modifications 34 11-15-2017 07:49 PM
help installing nerf bars prince Interior/Exterior Appearance & Modifications 6 03-08-2016 12:01 AM
Just installed Lockpick V4 Cyklopz Audio/ Video/ Navigation / Electronics Discussion 3 06-24-2011 04:51 PM
Installing nitro head unit in Chevy norcal707 General Discussion 3 11-20-2009 09:22 AM
MyGIG Lockpick interface rickaren Audio/ Video/ Navigation / Electronics Discussion 0 08-16-2008 07:34 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome