[Ben buchholz]

Hi all , can anyone help with information regarding these automatic transmissions . Oil and filters have been charged, The vehicle starts off drives from first into second gear perfectly, then holds second gear till redline before 3rd . Come to a stop then as you take off its stuck in 2nd gear and will not change. Pull over , turn car off in park . Then start the car take off again in first then changes into second then holds 2nd again until you stop car and turn car off ..
Is it the transmission control module? And where and what price am I looking at .. I'm in Australia/ goldcoast.. thankyou

 

[rickaren]

P0882 – Transmission control module (TCM) -power input signal low

Dodge Nitro: Auto Trans Issues (threads merged)

Hi Drsuesst20 There were many issues with the early Nitro 3.7 trany and was the subject of many recalls mostly software. If you have not already check and see if any sound like your issue. http://www.dodge-nitro.com/forums/f9/recalls-look-up-vin-14418/ #6 It could be a cracked or broken...

www.dodge-nitro.com

#167

You should have a error code on your dash using a OBD2 scanner to help guide you to the issue.