long story short, I replaced everything a/c related under the hood. in doing so, I broke the o-ring on the radiator plug so that when it was ran, lost all antifreeze and overheated. When it overheated, I dropped a valve seat. ended up replacing entire engine with a rebuilt one. now since...
When retrieving Dodge check engine light codes with an OBD II scan tool, proceed as follows:
1. Connect scan tool to the 16-pin data link connector (DLC) located near the steering column. The connector may have a removable cover.
2. Turn the ignition on.
3. Follow scan tool manufacturer's...
Does anyone else notice that the auto trans seems to have a hard time finding the right gear sometimes? It feel as though (when decelerating) that it almost skips a gear and makes the change feel a lot harsher.
Driving my 2008 Dodge Nitro and all of a sudden a clunk sound and the it seems to be out of gear.
i stop and pull over and shut the car off and drive away.......it does this from time to time. Dealer service dept
cant seem to find the problem....can someone help me?
DODGE NITRO MISFIRE AND SMOKING FROM TAILPIPE DIAGNOSIS
Nov 10, 2019
In todays case study we are looking at a 2007 dodge Nitro with a 3.7l v6 engine. The vehicle is running rough, jerking and smoking from the tailpipe. The check engine light is flashing and using a scan tool to read trouble...