Jul 12, 2019
How to change dodge nitro 3.7 water pump replacement
1. Remove batter
2. Remove windshield washer motor
3. Remove horn
4. Remove two top and two bottom torx screw on coolant and washer reservoir
5. Remove serpentine belt
6. Remove belt pulley
7. Remove water pump
Hell everyone. Just got back from the dodge dealer and test drove the 3.7L 4X4.
I was in the market for a small-mid pickup, that is untill I ran into this truck. I was wondering if you guys, or gals have experienced any offroad conditions in the Nitro? Maybe some mild trail riding or a slight...
Jun 21, 2020
#ProjectNitro is a GO!!!! Hello everyone and welcome back to the new Channel. our channels going to be changing I'm not going to be doing as much of the simulation racing anymore I still will be posting that every once in awhile NASCAR Heat 5 is coming out I'll be posting some of...
So, my Nitro (2.8 auto diesel) has developed quite a bad fault...
...when I engage reverse and the vehicle stars moving backwards, all is normal but as soon as a put any amount of gas on the pedal, I get the following warnings:
CAN Bus C performance
Loss comms TCM
Hello I have a 2011 nitro shock driver side control stopped working only the rear windows would go up and down no locks front windows or mirrors passenger and rear switches work the windows just fine I replaced the driver side unit still same problem so I replaced the control module on the...