Dodge Nitro Forum banner
1 - 2 of 2 Posts

·
Super Moderator
Joined
·
26,553 Posts
Discussion Starter · #1 ·
Dodge Nitro - DASHBOARD CENTER BEZEL TRIM REPLACEMENT / REMOVAL (2007 - 2012)


Mar 20, 2022

Step-by-step guide on how to remove / replace front dashboard center bezel piece on Dodge Nitro SUV. Also I will show how to remove replace and switch all accessories which are within the bezel (such as heated seats switches, hazard light switch, climate controls, vents). (2007 | 2008 | 2009 | 2010 | 2011 | 2012 | SLT | R/T | LIMITED | SXT ). There is no screws holding the center silver dash bezel, only plastic clips. You want to carefully pop the bezel out. Once that is done you will want to unplug the climate controls, lower portion switches, hazard lights switch and cigarette lighter. Then you will have to unscrew and separately remove each of the accessories. You will need a phillips screwdriver. Install all the pieces to the new center bazel.
 

·
Super Moderator
Joined
·
26,553 Posts
Discussion Starter · #2 ·
Dodge Nitro - DASH AIR VENT REPLACEMENT / REMOVAL (2007-2012)


Mar 21, 2022

Video on how to remove / replace front dashboard air vents on Dodge Nitro SUV. This plastic air vents often crack or stop turning and circulating air to the desired location (2007 | 2008 | 2009 | 2010 | 2011 | 2012 | SLT | R/T | LIMITED | SXT ). While removing the dashboard center plastic bezel piece, you want to be careful not to crack it. It likes to crack so make sure to use plastic trim remover. Once you have pulled out the center trim, there are 4 clips holding each vent in place. No screws whatsoever. Unclip those plastic clips and remove the faulty air vents.
 
1 - 2 of 2 Posts
Top