Dodge Nitro Forum banner

1 - 2 of 2 Posts

·
Super Moderator
Joined
·
23,434 Posts
Discussion Starter #1
Jeep Wrangler Pickup Truck Could Be Called Gladiator, Not Scrambler



Nov 12, 2018

The long-awaited Jeep Wrangler pickup truck will make its grand debut later this month at the 2018 Los Angeles Auto Show. Now we know that it might be called the Gladiator and not the Scrambler, which had generally been accepted as the truck’s new name until now.

The new pickup will look a great deal like the JL Wrangler, except it will feature a cargo box and the overall form of a mid-sized pickup rather than the tried-and-true SUV form. It will almost certainly come with the same engines as the current Wrangler and we can expect that the shared cabin portions will have the same basic look.


The Wrangler-based pickup will likely copy as many aspects of the SUV as possible, as the people calling for a mid-sized Jeep truck want a Wrangler pickup – not a pickup that looks like a Wrangler up front. It likely combines the feel and function of the current Wrangler with the cargo-hauling capabilities of a mid-sized pickup.

The biggest question recently has focused on the name, with many outlets referring to it as the Scrambler, as that was the name of the last truck offered by Jeep. However, information from a Jeep Scrambler Forum that was found on the FCA Media website seemingly reveals the name of this new truck and it is the 2020 Gladiator. That information has since been removed from the FCA website, but this information seemingly reveals the name of the upcoming pickup.

This comes as a surprise to some people, but this isn’t the first time that Jeep has offered up a Gladiator. Back in the 1960s, Jeep offered a truck based on the Wagoneer called the Gladiator. The biggest hang-up for critics of the name could be the fact that the Gladiator was based on the larger Wagoneer while the Scrambler was based on the CJ, which eventually became the Wrangler. That was why many people figured that the new Wrangler pickup would be called the Scrambler, but history aside, Gladiator seems to fit better from a marketing aspect.

More importantly, this wouldn’t be the first time in recent history where Jeep built a Wrangler-based pickup called the Gladiator. Back in 2005, Jeep introduced the Wrangler Gladiator Concept (shown here in green) at the North American International Auto Show as a mid-sized pickup based on the JK Wrangler. It is expected that the JL Wrangler-based truck will have a similar look to the 2005 Gladiator Concept, so it would make good sense for the production truck to also carry the Gladiator name.

AutoGuide.com
 

·
Super Moderator
Joined
·
23,434 Posts
Discussion Starter #2
Leaked Photos Unveil 2020 Jeep Gladiator

Wrangler Truck: Leaked Photos Unveil 2020 Jeep Gladiator





Nov 15, 2018

The former jeepscramblerforum.com, now dubbed jeepgladiatorforum.com, has released Jeep photos of the Gladiator pickup, from a leaked press kit.

The pickup seems to be a bit longer than expected, which suggests that the Toledo plant where it’s made has been renovated to allow for longer-wheelbase vehicles. The rear wheels are relatively close to the back of the pickup.

The Jeep pickup, officially now named Gladiator (after a full-size-pickup of the 1960s) rather than Scrambler (the name of the CJ-based pickup of the 1980s), will have a choice of just two engines, the Pentastar gasoline V6 and the VM 3-liter diesel V6 (also used in the Ram). Transmissions are the usual six-speed manual and eight-speed automatic. Expect all the Wrangler’s off-road systems (Command-Trac, Rock-Trac, Dana 44 axles, electric front and rear lockers, limited slip differential, sway-bar disconnect, and 33-inch offroad tires).

The payload is relatively small, at 1,600 pounds, though that should be more than enough for the short bed; the towing capacity is a hefty 7,650 pounds. The steel bed is five feet long, with tie-downs and a power source. Apparently, it even gets a folding windshield. Options include soft and hard tops.

AutoGuide.com
 
1 - 2 of 2 Posts
Top