Dodge Nitro Forum banner

Warping Interior Panels???

2915 Views 3 Replies 3 Participants Last post by  mkaresh
I noticed last night as I was starting to piece a sound system together for the car that some of the interior panels were warped. They have never had water on them at all, but they were sitll warped. One of the rear quarter panels just over the jack location warped right at the top line by the window and the jack panel cover as well. The little square panel inside the tailgate hatch which covers up I have no idea what warped too. Before I go back to the dealership to have it fixed has anyone else had any sort of problems with panels too?
1 - 4 of 4 Posts
CentralOregonNitro said:
I noticed last night as I was starting to piece a sound system together for the car that some of the interior panels were warped. They have never had water on them at all, but they were sitll warped. One of the rear quarter panels just over the jack location warped right at the top line by the window and the jack panel cover as well. The little square panel inside the tailgate hatch which covers up I have no idea what warped too. Before I go back to the dealership to have it fixed has anyone else had any sort of problems with panels too?
These are bad fit & finish problems that are covered by warranty. I have a couple places that I'll eventually have swapped out.
I'd report it now but understand almost every part for this vehicle is on national backorder. Just take it in an get a write up on it so you'll be covered and wait for the parts. My guess is by middle summer spare parts won't be the wait they are now.
Thanks for the information. I will let them know tomorrow...
Thanks for the heads-up. I'll keep an eye out for this problem with the Nitros in my site's reliability panel.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top